EOTech G23 FTS – 3X Magnifier
|
click to enlarge |
The 3X magnifier is an affordable magnified solution that will transition a fielded HWS into a lethal medium range optic. Superior light transmission and a large field of view helps this magnifier put the competition to shame. This rugged, streamlined optic offers split-second transitioning from CQB to medium range targeting.
This is the 2nd Generation of L3 EOTech magnifiers. It offers a half inch more eye relief, positions the windage and elevation adjustments inside of the optic rather than in the mount, less moving parts in the mount which makes the mount even more stable, and has a quick release thow lever on the bottom of the mount which allows the quick removal of both the optic and the mount. This magnifier aligns perfectly with standard height sights and comes with a 7mm riser to accomadate the 7mm raised sights.
3x magnifier with Flip-To-Side mount and quick detach. Works with all existing HWS units.
|
Specifications |
|
|
Magnifcation Fixed |
3.25X |
|
Eye Relief |
1.97 (50mm) |
|
Length |
4.4 (113mm) |
|
Weight |
11.9oz (372 grams) |
|
Temperature |
-40 to 160 F |
|
Waterproof |
33ft |
|
Sealing |
Fogproof Internal Optics |
|
Color/Finish |
Black |
|
Mount |
MIL-STD-1913 rail |
|
Mount |
Retrofits to all HWS models Included 7mm riser for raised bases |
|
Length |
1.6 (40.6mm) |
|
Height |
1.64 (41.65mm) Clears common low profile flip up rear iron sights |
|
Weight |
4.5oz (128 grams) |
|
Color/Finish |
Non reflective black with hard coat finish |
|
Flip Orientation |
Ambidextrous mount to allow left or right flip |
|
Rail Interface |
Fixed Picatinny with single mounting bolt. |
|
Magnifier Interface |
Retained by ARMS throw |
|
Optical Axis Adjustment |
Horizontal and vertical adjustments within mount |
–
BDUGhillie suits Jacket
Same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat.
Size Chart
Our Same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by ATLANCO. The sewn on Jute thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1×1 netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. (Weight 6 lbs.)
Size Chart
|
SS Small-Short |
SR Small-Regular |
SL Small-Long |
|
|
BDU PANTS – Waist |
27-31 |
27-31 |
27-31 |
|
BDU PANTS – Inseam |
26 1/2-29 1/2 |
29 1/2-32 1/2 |
32 1/2-35 1/2 |
|
BDU COAT – Chest |
33-37 |
33-37 |
33-37 |
|
BDU COAT – Height |
63-67 |
67-71 |
71-75 |
|
MS Medium-Short |
MR Medium-Regular |
ML Medium-Long |
|
|
BDU PANTS – Waist |
31-35 |
31-35 |
31-35 |
|
BDU PANTS – Inseam |
26 1/2-29 1/2 |
29 1/2-32 1/2 |
32 1/2-35 1/2 |
|
BDU COAT – Chest |
37-41 |
37-41 |
37-41 |
|
BDU COAT – Height |
63-67 |
67-71 |
71-75 |
|
LS Large-Short |
LR Large-Regular |
LL Large-Long |
|
|
BDU PANTS – Waist |
35-39 |
35-39 |
35-39 |
|
BDU PANTS – Inseam |
26 1/2-29 1/2 |
29 1/2-32 1/2 |
32 1/2-35 1/2 |
|
BDU COAT – Chest |
41-45 |
41-45 |
41-45 |
|
BDU COAT – Height |
63-67 |
67-71 |
71-75 |
|
XLR Extra Large-Regular |
XLL Extra Large-Long |
|
|
BDU PANTS – Waist |
39-43 |
39-43 |
|
BDU PANTS – Inseam |
29 1/2-32 1/2 |
32 1/2-35 1/2 |
|
BDU COAT – Chest |
45-49 |
45-49 |
|
BDU COAT – Height |
67-71 |
71-75 |
|
XXLR 2X Large-Regular |
XXLL 2X Large-Long |
XXXLL 3X Large-Long |
|
|
BDU PANTS – Waist |
43-47 |
43-47 |
47-51 |
|
BDU PANTS – Inseam |
29 1/2-32 1/2 |
32 1/2-35 1/2 |
29 1/2-32 1/2 |
|
BDU COAT – Chest |
49-53 |
49-53 |
53-57 |
|
BDU COAT – Height |
67-71 |
71-75 |
67-71 |
So far there's (just?) 0 comments on this post - join in and add one »