EOTech G23 FTS – 3X Magnifier

The 3X magnifier is an affordable magnified solution that will transition a fielded HWS into a lethal medium range optic. Superior light transmission and a large field of view helps this magnifier put the competition to shame. This rugged, streamlined optic offers split-second transitioning from CQB to medium range targeting.

This is the 2nd Generation of L3 EOTech magnifiers. It offers a half inch more eye relief, positions the windage and elevation adjustments inside of the optic rather than in the mount, less moving parts in the mount which makes the mount even more stable, and has a quick release thow lever on the bottom of the mount which allows the quick removal of both the optic and the mount. This magnifier aligns perfectly with standard height sights and comes with a 7mm riser to accomadate the 7mm raised sights.

3x magnifier with Flip-To-Side mount and quick detach. Works with all existing HWS units.

–

BDUGhillie suits Jacket

Same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat.

Size Chart

Our Same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by ATLANCO. The sewn on Jute thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1×1 netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. (Weight 6 lbs.)

Size Chart

camouflage Ghillie Poncho -
The “Tracker”

For those who only need the upper Torso covered. This is the fast mobility suit. Designed for fast sprints, then kneeling down where you don’t really need your lower half covered. The “Tracker” has full sleeves for your arms, a generous hood, and covers the torso in front and back. Why buy a “Rag” at other internet sites that don’t cover the arms. Buy the “Tracker”!

Assembled on a 100% Nylon netting with 3.5 Lbs. of Cut and Dyed Jute attached. Actual weight for the “Tracker” is 4.5 Lbs.” Add a pair of the Sniper BDU Pants to compliment this suit. Great for Turkey hunters, or for those who will be kneeling down a lot.

–

NFA weapons are: machine guns, sound suppressors (a.k.a. silencers), short barreled shotguns, short barreled rifles, destructive devices and “any other weapons“. A machine gun is any gun that can fire more than one shot with a single pull of the trigger, or a receiver of a machine gun, or a combination of parts for assembling a machine gun, or a part or set of parts for converting a gun into a machine gun. A silencer is any device for muffling the gunshot of a portable firearm, or any part exclusively designed or intended for such a device (see discussion below). A short barreled shotgun is any shotgun (shoulder fired, smooth bore) with a barrel of less than 18″ or an overall length of less than 26″, or any weapon made from a shotgun falling into the same length parameters. A short barreled rifle is a rifle (shoulder fired, rifled bore) with a barrel length of less than 16″, or an overall length of less than 26″, or any weapon made from a rifle falling into the same length parameters (like a pistol made from a rifle). In measuring barrel length you do it from the closed breech to the muzzle, see 27 CFR sec. 179.11. To measure overall length do so along, “the distance between the extreme ends of the weapon measured along a line parallel to the center line of the bore.” 27 CFR sec. 179.11. On a folding stock weapon you measure with the stock extended, provided the stock is not readily detachable, and the weapon is meant to be fired from the shoulder. A destructive device (DD) is a explosive, incendiary or poison gas weapon, or any firearm with a bore over 1/2″, with exceptions for sporting shotguns, among other things (see discussion below). Any other weapons (AOW’s) are a number of things; smooth bore pistols, any pistol with more than one grip,(but see below) gadget type guns (cane gun, pen gun) and shoulder fired weapons with both rifled and smooth bore barrels between 12″ and 18″, that must be manually reloaded (see discussion below). These definitions are simplified, to see if a specific gun is a title 1 or 2 firearm one needs to refer to the specific definition under the statute(s), and possibly consult with the Technology Branch of ATF. There is also case law on the issue of whether a specific item falls into one of these categories.

EOTech XPS2 Holographic Sights/ Red Dot Sight

Shortest model sight yet! This sight is smaller than the former N-cell battery sight (511/551) and runs on a single 123 battery . It also has a longer battery life than the N-cell style sights. Smaller,lighter and always fast with three reticle options. With the new single battery configuration, the XPS allows more rail space than ever, leaving more room for rear iron sights or NV mount.

• Single transverse 123 battery to reduce sight length

• Shortened base only requires at most 2 3/4 inch of rail space compared to the 4 inch N battery sights

• battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved

• battery compartment is now separated from the base to allow it to hover over the delta ring of the rifle

• Average battery life at brightness level 12 is roughly 500-600 hours, 3X battery life of N cell sights

• Three reticle options: 0- 65MOA (Minute of Angle) circle with 1 MOA (Minute of Angle) aiming dot, 1-single 1MOA (Minute of Angle) aiming dot, 2-65MOA (Minute of Angle) circle with two 1MOA (Minute of Angle) aiming dots

• Available in Night Vision (XPS3) and non- Night Vision (XPS2) versions. The numbers reflect the number of the buttons on the back of the sight.

#EOT-XPS2-0 EOTech XPS2-0: 65 MOA (Minute of Angle) ring & 1 MOA (Minute of Angle) Dot
#EOT-XPS2-1 EOTech XPS2-1: 1 MOA (Minute of Angle) Dot
#EOT-XPS2-2 EOTech XPS2-2: 65 MOA (Minute of Angle) ring & 1 MOA (Minute of Angle) Dot

–

Gun accessories and Rifle Stocks » Blog Archive »
moose hunting. Most hunts start and end at one of our 4 base camps, which are equipped with log structures and/or heated cabins. From there, hunters leave with a string …

Gun accessories and Rifle Stocks » 2008 » May
Rifle Stocks. Manufactured out of military grade composite to ensure high quality and strength No modifications required for stamped 1.05mm receivers with standard tang

Gun accessories and Rifle Stocks » Blog Archive »
AR-15 Sights. Ever have a hard time picking up your front sight in low light? AR-15 Sights /M16 series rifle has developed into an excellent system with more accessories supporting …

Gun accessories and Rifle Stocks
NFA Branch desires that folks who install sears into guns where the sear is not very accessible, HK guns in particular, tell them the make, model and serial number of the gun into …